[directfb-users] Problem with directfb and matrox g550

["Dylan D" <admin@movingideasanimation.com>]

Hello all,

I'm using directfb cvs and kernel 2.6.5 and a matrox g550

 

Mplayer has no issue outputing to the tv with dfbmga switch.

 

But i'm having issues wit qt-embedded outputting to The tv using directfb

 

 

I noticed when i run dfbinfo i get these errors.

 

 

"

Directdfb/Matrox: Can't find device in /proc/bus/pci
DirectFB/Core: Could not initialize gfxcard core!.
--> General Initialization failure...

 

"

 

 

Yet fbset shows this

 

 

mode "640x480-60"
    # D: 25.176 MHz, H: 31.469 kHz, V: 59.942 Hz
    geometry 640 480 640 26214 8
    timings 39721 40 24 32 11 96 2
    accel true
    rgba 8/0,8/0,8/0,0/0
endmode

Frame buffer device information:
    Name        : MATROX
    Address     : 0xe4000000
    Size        : 16777216
    Type        : PACKED PIXELS
    Visual      : PSEUDOCOLOR
    XPanStep    : 8
    YPanStep    : 1
    YWrapStep   : 0
    LineLength  : 640
    MMIO Address: 0xe6000000
    MMIO Size   : 16384
    Accelerator : Matrox G400

and /proc/bus/pci/devices show my matroxfb

 

 

00f0 10de01e8 0 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0140 11317146 10 e9000000 00000000 00000000 00000000 00000000 00000000
00000000 00000200 00000000 00000000 00000000 00000000 00000000 00000000
0200 102b2527 13 e4000008 e6000000 e7000000 00000000 00000000 00000000
00000000 02000000 00004000 00800000 00000000 00000000 00000000 00020000
matroxfb

 

 

Any suggestions ?